Reset

HPE HPE 1TB 6G SATA LFF internal hard drive 7200 RPM 3....
1TB, 3.5", SATA, 7200rpm, 6Gb/s, 1.36kgDescriptionHP SATA hard drives are designed for reliability and mass storage demanded by today's server and storage environments. The SATA hard drive portfolio is categorized into two categories: Entry (ETY) and Midline (MDL) hard drives. HP SATA Entry hard drives are the lowest unit-cost solution for entry level servers. Designed for economical reliability and performance for non-mission critical applications, Entry and Midline SATA hard drives provide the best price advantage for these lower workload environments. These hard drives are available in Small Form Factor (2.5in) and Large Form Factor (3.5in) for both hot plug and non-hot plug environments.Designed and Engineered to Provide Reliable and Cost Efficient Data Storage.Increased Midline drive reliability of approximately two times that of Entry drives based on a <40% workload. Lowers cost without sacrificing reliability with Enterprise class hard drives at the lowest $/GB. Cost optimized and capacity optimized solutions that provide up to 3TB storage in a single device. Available in 2.5in (SFF) and 3.5in (LFF) form factors in a wide variety of capacity points. Rotational Vibration Sensors: Enhanced rotational vibration tolerance provides Enterprise class reliability in a Midline drive. 3Gb/sec data transfer rate supporting existing servers. New 6Gb/sec data transfer rate exclusively for HP ProLiant Gen8 servers, with new hot plug carrier design.Midline SATA offers customers the lowest $/GB drives and increased features over Entry SATA.Increased reliability of approximately two times Entry drive reliability based on <40% workload. Detects a specific temperature threshold, drive throttles performance to protect itself. Improved rotational vibration robustness for immunity to environmental rotational affects. Native Command Queuing (NCQ), Buffer Error Detection, Time Limited Error Recovery (TLER), Microcode Download and 3Gb/s compatibilty. Ship with a standard one year warranty.SATA ApplicationsWith the attractive low acquisition cost and high capacity points of SATA drives it is important to understand the appropriate applications where SATA drives should be used. Proper usage (IE <40% workload) of these drives will lessen the probability of drive failure. For high IOP's performance intense applications, mission critical applications or extreme environments HP recommends Enterprise Serial Attached SCSI (SAS) hard drives.Specifications Hard drive Data transfer rate 6 Gbit/s HDD speed 7200 RPM HDD size 3.5" HDD capacity 1 TB Features Interface Serial ATA III HDD speed 7200 RPM HDD size 3.5" HDD capacity 1 TB Power Operating voltage 5 / 12 V Ports & interfaces USB 3.2 Gen 1 (3.1 Gen 1) ports quantity 0 USB 2.0 ports quantity 0 FireWire 800 No FireWire 400 No Network Wi-Fi No Ethernet LAN No Technical details Connectivity technology Wired Interface Serial ATA III Product colour Black Number of products included 1 pc(s) Internal Yes Weight & dimensions Width 26.4 mm Weight 6 g Height 184.2 mm Depth 110.7 mm Storage Compatible memory cards Not supported Card reader integrated No Other features Connectivity technology Wired Interface Serial ATA III Wi-Fi No Ethernet LAN No Product colour Black USB 3.2 Gen 1 (3.1 Gen 1) ports quantity 0 USB 2.0 ports quantity 0 Number of products included 1 pc(s) FireWire 800 No FireWire 400 No Data transfer rate 6 Gbit/s Compatible memory cards Not supported Card reader integrated No Internal Yes
£791.70
HPE HPE 1TB 6G SFF internal hard drive 1.02 TB 7200 RPM...
1TB, 2.5", SATA, 7200rpm, 6Gb/s, 1.36kgDescriptionHP SATA hard drives are designed for reliability and mass storage demanded by today's server and storage environments. The SATA hard drive portfolio is categorized into two categories: Entry (ETY) and Midline (MDL) hard drives. HP SATA Entry hard drives are the lowest unit-cost solution for entry level servers. Designed for economical reliability and performance for non-mission critical applications, Entry and Midline SATA hard drives provide the best price advantage for these lower workload environments. These hard drives are available in Small Form Factor (2.5in) and Large Form Factor (3.5in) for both hot plug and non-hot plug environments.Designed and Engineered to Provide Reliable and Cost Efficient Data Storage.Increased Midline drive reliability of approximately two times that of Entry drives based on a <40% workload. Lowers cost without sacrificing reliability with Enterprise class hard drives at the lowest $/GB. Cost optimized and capacity optimized solutions that provide up to 3TB storage in a single device. Available in 2.5in (SFF) and 3.5in (LFF) form factors in a wide variety of capacity points. Rotational Vibration Sensors: Enhanced rotational vibration tolerance provides Enterprise class reliability in a Midline drive. 3Gb/sec data transfer rate supporting existing servers. New 6Gb/sec data transfer rate exclusively for HP ProLiant Gen8 servers, with new hot plug carrier design.Midline SATA offers customers the lowest $/GB drives and increased features over Entry SATA.Increased reliability of approximately two times Entry drive reliability based on <40% workload. Detects a specific temperature threshold, drive throttles performance to protect itself. Improved rotational vibration robustness for immunity to environmental rotational affects. Native Command Queuing (NCQ), Buffer Error Detection, Time Limited Error Recovery (TLER), Microcode Download and 3Gb/s compatibilty. Ship with a standard one year warranty.SATA ApplicationsWith the attractive low acquisition cost and high capacity points of SATA drives it is important to understand the appropriate applications where SATA drives should be used. Proper usage (IE <40% workload) of these drives will lessen the probability of drive failure. For high IOP's performance intense applications, mission critical applications or extreme environments HP recommends Enterprise Serial Attached SCSI (SAS) hard drives.Specifications Hard drive Data transfer rate 6 Gbit/s HDD interface transfer rate 6 Gbit/s SMART technology Yes HDD speed 7200 RPM HDD size 2.5" HDD capacity 1.02 TB Features Type HDD HDD interface transfer rate 6 Gbit/s Interface Serial ATA SMART technology Yes HDD speed 7200 RPM HDD size 2.5" HDD capacity 1.02 TB Power Operating voltage 5 V Technical details Harmonized System (HS) code 84717050 Interface Serial ATA Product colour Black Number of products included 1 pc(s) Internal Yes Ports & interfaces USB 3.2 Gen 1 (3.1 Gen 1) ports quantity 0 USB 2.0 ports quantity 0 FireWire 800 No FireWire 400 No Network Wi-Fi No Ethernet LAN No Weight & dimensions Width 26.4 mm Weight 1.36 kg Height 184.2 mm Depth 110.7 mm Storage Compatible memory cards Not supported Card reader integrated No Logistics data Harmonized System (HS) code 84717050 Other features Interface Serial ATA Wi-Fi No Ethernet LAN No Product colour Black USB 3.2 Gen 1 (3.1 Gen 1) ports quantity 0 USB 2.0 ports quantity 0 Number of products included 1 pc(s) FireWire 800 No FireWire 400 No Data transfer rate 6 Gbit/s Compatible memory cards Not supported Card reader integrated No Internal Yes
£330.20
HPE HPE 1TB 7.2K LFF 6G SATA internal hard drive 7200 R...
1TB 6G SATA 7200 RPM LFF (3.5-inch) SC Midline (MDL) Hard DriveDescriptionHP SATA drives are designed for the reliability and mass storage demanded by today's entry server and external storage environments. The SATA portfolio is categorized into two categories: Entry (ETY) and Midline (MDL) drives. HP SATA Entry drives are the lowest unit-cost solution for entry-level servers. HP SATA Midline drives are designed with economical reliability and performance for external storage, backups and archival applications. These high capacity drives provide the lowest $/GB to our customers. Both Entry and Midline SATA drives provide the best price advantage for non-mission critical applications with low workloads of 40% or less. HP SATA drives are available small form factor (3.5-inch) and large form factor (2.5-inch) and ship with a standard one year warranty.Specifications Hard drive Data transfer rate 6 Gbit/s Component for Server/workstation HDD speed 7200 RPM HDD size 3.5" HDD capacity 1 TB Compatible products HP ProLiant DL360p Gen8 Software Windows operating systems supported Yes Linux operating systems supported Yes Features Component for Server/workstation Interface Serial ATA III Windows operating systems supported Yes Linux operating systems supported Yes HDD speed 7200 RPM HDD size 3.5" HDD capacity 1 TB Compatible products HP ProLiant DL360p Gen8 System requirements Windows operating systems supported Yes Linux operating systems supported Yes Operational conditions Operating temperature (T-T) 0 - 60 °C Storage temperature (T-T) -40 - 65 °C Operating relative humidity (H-H) 5 - 90% Storage relative humidity (H-H) 5 - 90% Technical details Interface Serial ATA III Number of products included 1 pc(s) Other features Interface Serial ATA III Windows operating systems supported Yes Linux operating systems supported Yes Number of products included 1 pc(s) Data transfer rate 6 Gbit/s Compatible products HP ProLiant DL360p Gen8
£817.70
HPE HPE 1TB hot-plug dual-port SAS internal hard drive ...
1TB hot-plug dual-port SAS hard disk driveDescription1TB hot-plug dual-port SAS hard disk drive - 6Gb/sec transfer rate, 7,200 RPM, 3.5-inch large form factor (LFF), Midline (MDL), SmartDrive Carrier (SC) - Not for use in MSA products - For use with Gen8/Gen9 or newerSpecifications Hard drive Component for Server/workstation HDD interface transfer rate 6 Gbit/s HDD speed 7200 RPM HDD size 3.5" HDD capacity 1 TB Features Type HDD Component for Server/workstation HDD interface transfer rate 6 Gbit/s Interface SAS HDD speed 7200 RPM HDD size 3.5" HDD capacity 1 TB Packaging content Storage drive adapter included No Technical details Interface SAS Packaging data Storage drive adapter included No Other features Interface SAS
£347.75
HPE HPE 1TB SATA 6G Business Critical 7.2K LFF LP 1-yea...
1TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Multi Vendor HDDReasons To BuyHPE Hard Drives Deliver High Performance and Reliability Across HPE Server and Storage PlatformsHPE Hard Disk Drives (HDDs) are enterprise-class drives for demanding 24x7 data center environments.HPE HDDs are validated and tested with on-going quality monitoring throughout their lifecycle.Enhance Total Server Storage Capacity for Business Critical Workloads with HPE HDDsHPE offers the highest-capacity 26 TB hard drives that are ideal for digital content, bulk storage, cloud, and web environments.HPE Business Critical Hard Drives offer high capacity for economic bulk storage.HPE HDDs are Engineered to Deliver High Capacity, Performance, Reliability, and Data SecurityHPE HDDs are engineered to maximize total server storage capacity within data center environments.HPE HDDs help prevent unauthorized access to your data with Digitally Signed Firmware.HPE HDDs help simplify the cost and complexity of re-purposing or disposing of drives while protecting data with Instant Secure Erase (ISE) technology.Simplify HDD planning and standardize HDDs across HPE server and storage solutions.Common HPE HDD carriers offer consistency and compatibility across HPE server and storage platforms.DescriptionDo your HPE servers and storage platforms need high capacity and proven performance hard drives to optimize your business critical data storage workloads? HPE Business Critical Hard Drives are engineered to deliver the highest capacity, performance, reliability, and data security across your data center applications. HPE Business Critical Hard Drives allow you to store more data without sacrificing performance or reliability. HPE Business Critical Hard Drives are available in both 3.5-inch Large Form Factor (LFF) and 2.5-inch Small Form Factor (SFF) and ship with a standard one-year warranty. All HPE hard drives pass a rigorous qualification process, which certify that every drive is proven to perform in your HPE server and storage environments. All HPE hard drives include digitally signed firmware which helps prevent unauthorized access to your data.What is new supporting point:Introducing the market-leading 26 TB SAS/SATA HDD, offering the highest capacity for more petabytes per rack.Introducing 10 TB air-filled SAS/SATA HDD which provides lower price per GB in the same capacity, replacing the old Helium-filled 10 TB.Offering more capacities in Basic Carrier (BC) to support the latest platforms.Specifications Hard drive HDD interface transfer rate 6 Gbit/s Bytes per sector 512n HDD speed 7200 RPM HDD size 3.5" HDD capacity 1 TB Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Features HDD interface transfer rate 6 Gbit/s Interface Serial ATA Bytes per sector 512n HDD speed 7200 RPM HDD size 3.5" HDD capacity 1 TB Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Form factor LFF Technical details Harmonized System (HS) code 84717050 Interface Serial ATA Height (imperial) 2.61 cm (1.03") Packaging content Storage drive adapter included No Weight & dimensions Width 146.1 mm Weight 1.36 kg Height 219.2 mm Depth 254 mm Packaging data Storage drive adapter included No Logistics data Harmonized System (HS) code 84717050 Other features Interface Serial ATA Height (imperial) 2.61 cm (1.03") Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information
£201.50
HPE HPE 1TB SATA 6G Business Critical 7.2K LFF SC 1-yea...
1TB SATA 6G Business Critical 7.2K LFF SC 1-year Warranty Multi Vendor HDDDescriptionSpecifications Hard drive HDD interface transfer rate 6 Gbit/s Bytes per sector 512n HDD speed 7200 RPM HDD size 3.5" HDD capacity 1 TB Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Features Type HDD HDD interface transfer rate 6 Gbit/s Interface Serial ATA Bytes per sector 512n HDD speed 7200 RPM HDD size 3.5" HDD capacity 1 TB Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Form factor LFF Power Operating voltage 5 / 12 V Technical details Quantity per pack 1 pc(s) Harmonized System (HS) code 84717050 Interface Serial ATA Height (imperial) 2.69 cm (1.06") Packaging content Storage drive adapter included No Weight & dimensions Width 26.8 mm Height 170 mm Depth 105.8 mm Packaging data Storage drive adapter included No Quantity per pack 1 pc(s) Logistics data Harmonized System (HS) code 84717050 Other features Interface Serial ATA Height (imperial) 2.69 cm (1.06") Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information
£791.70
HPE HPE 1TB, Hot-Plug, Serial ATA (SATA), 3G, 7.2K rpm,...
1TB, Hot-Plug, Serial ATA (SATA), 3G, 7.2K rpm, 3.5 inch LFF, MDL, NCQDescriptionHP SATA drives are designed for the reliability and mass storage demanded by today's entry server and external storage environments. The SATA portfolio is categorized into two categories: Entry (ETY) and Midline (MDL) drives. HP SATA Entry drives are the lowest unit-cost solution for entry-level servers. HP SATA Midline drives are designed with economical reliability and performance for external storage, backups and archival applications. These high capacity drives provide the lowest $/GB to our customers. Both Entry and Midline SATA drives provide the best price advantage for non-mission critical applications with low workloads of 40% or less. HP SATA drives are available small form factor (2.5-inch) and large form factor (3.5-inch) and ship with a standard one year warranty.- Entry SATA drives offer customers the lowest acquisition cost, features include the following:.Reliability for non-mission critical entry server environments, appropriate for <40% workload. Native Command Queuing (NCQ) to increase performance of SATA hard disks by optimizing the order in which received read and write commands are executed. Buffer Error Detection is used to protect the data in the drive buffer via parity or ECC. TLER purposely constrains the drive to report the error as soon as possible within 5 seconds vs. unlimited retries. Ships with a standard one year warranty.- Midline SATA offers customers the lowest $/GB drives and increased features over Entry SATA.Increased reliability of approximately two times Entry drive reliability based on <40% workload. Detects a specific temperature threshold, drive throttles performance to protect itself. Improved rotational vibration robustness for immunity to environmental rotational affects. Native Command Queuing (NCQ), Buffer Error Detection, Time Limited Error Recovery (TLER), Microcode Download and 3Gb/s compatibilty. Ship with a standard one year warranty.- SATA Applications.With the attractive low acquisition cost and high capacity points of SATA drives it is important to understand the appropriate applications where SATA drives should be used. Proper usage (IE <40% workload) of these drives will lessen the probability of drive failure. For high IOP's performance intense applications, mission critical applications or extreme environments HP recommends Enterprise Serial Attached SCSI (SAS) hard drives.Specifications Hard drive Component for Server/workstation HDD interface transfer rate 3 Gbit/s Hot-swap Yes HDD speed 7200 RPM HDD size 3.5" HDD capacity 1 TB Features Type HDD Component for Server/workstation HDD interface transfer rate 3 Gbit/s Interface Serial ATA II Hot-swap Yes HDD speed 7200 RPM HDD size 3.5" HDD capacity 1 TB Technical details Quantity per pack 1 pc(s) Interface Serial ATA II Dimensions (WxDxH) 26.4 x 110.7 x 184.2 mm Hot-swap Yes Weight & dimensions Weight 1.36 kg Packaging data Quantity per pack 1 pc(s) Other features Interface Serial ATA II Dimensions (WxDxH) 26.4 x 110.7 x 184.2 mm
£169.00
HPE HPE 2.4TB SAS 12G Mission Critical 10K SFF BC 3-yea...
2.4TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Multi Vendor HDDReasons To BuyHigh Performance Enterprise-Class Drives for High I/O WorkloadsHPE Mission Critical Hard Drives are ideal for demanding environments including transaction processing, database applications and high-performance computing (HPC).Deliever higher performance for enterprise data canter environments.12G SAS interface for increased performance.Efficient drives provide power for space-constrained data centers.Reliable Enterprise-Class Drives for Enterprise and Data Center WorkloadsHPE Mission Critical Hard Drives are designed for demanding 24/7 data center environments.Stable and consistent portfolio of drives offer long life cycles and steady supply.DescriptionDo your servers need high-performance enterprise hard drives for both your mission-critical and I/O-intensive applications? HPE Mission Critical Hard Drives offer a high level of performance and reliability for your most demanding application workloads. They help you improve server response times, power more transactions per second, and accelerate data transfer (I/O) speeds. HPE Mission Critical Hard Drives are available in 2.5-inch Small Form Factor (SFF). All HPE hard drives pass a rigorous qualification process, which certify that every drive is proven to perform in your HPE server and storage environments. All HPE hard drives also include digitally signed firmware which helps prevent unauthorized access to your data.What is new supporting point:Offering 300 GB, 600 GB, 1.2 TB, 1.8 TB and 2.4 TB 10K SAS Small Form Factor (SFF) Mission Critical Hard Drives with Basic Carrier (BC).Offering 1.2 TB and 2.4 TB 10K SAS Small Form Factor (SFF) Mission Critical TAA Hard Drives with Basic Carrier (BC).Specifications Hard drive Component for Server HDD interface transfer rate 12 Gbit/s Bytes per sector 512e Hot-swap Yes HDD speed 10000 RPM HDD size 2.5" HDD capacity 2.4 TB Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Features Type HDD Component for Server HDD interface transfer rate 12 Gbit/s Interface SAS Bytes per sector 512e Hot-swap Yes HDD speed 10000 RPM HDD size 2.5" HDD capacity 2.4 TB Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Form factor SFF Technical details Harmonized System (HS) code 84717050 Interface SAS Width (imperial) 14.6 cm (5.75") Hot-swap Yes Height (imperial) 14 cm (5.5") Depth (imperial) 22.2 cm (8.75") Weight & dimensions Width 146.1 mm Weight 500 g Height 139.7 mm Depth 222.3 mm Weight (imperial) 0.499 kg (1.1 lbs) Dimensions (W x D x H) (imperial) 146.1 x 222.2 x 139.7 mm (5.75 x 8.75 x 5.5") Logistics data Harmonized System (HS) code 84717050 Other features Interface SAS Width (imperial) 14.6 cm (5.75") Height (imperial) 14 cm (5.5") Depth (imperial) 22.2 cm (8.75") Weight (imperial) 0.499 kg (1.1 lbs) Dimensions (W x D x H) (imperial) 146.1 x 222.2 x 139.7 mm (5.75 x 8.75 x 5.5") Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information
£1,112.80
HPE HPE 2.4TB SAS 12G Mission Critical 10K SFF SC 3-yea...
2.4TB SAS 12G Mission Critical 10K SFF SC 3-year Warranty 512e Multi Vendor HDDReasons To BuyHigh Performance Enterprise-Class Drives for High I/O WorkloadsHPE Mission Critical Hard Drives are ideal for demanding environments including transaction processing, database applications and high-performance computing (HPC).Deliever higher performance for enterprise data canter environments.12G SAS interface for increased performance.Efficient drives provide power for space-constrained data centers.Reliable Enterprise-Class Drives for Enterprise and Data Center WorkloadsHPE Mission Critical Hard Drives are designed for demanding 24/7 data center environments.Stable and consistent portfolio of drives offer long life cycles and steady supply.DescriptionDo your servers need high-performance enterprise hard drives for both your mission-critical and I/O-intensive applications? HPE Mission Critical Hard Drives offer a high level of performance and reliability for your most demanding application workloads. They help you improve server response times, power more transactions per second, and accelerate data transfer (I/O) speeds. HPE Mission Critical Hard Drives are available in 2.5-inch Small Form Factor (SFF). All HPE hard drives pass a rigorous qualification process, which certify that every drive is proven to perform in your HPE server and storage environments. All HPE hard drives also include digitally signed firmware which helps prevent unauthorized access to your data.What is new supporting point:Offering 300 GB, 600 GB, 1.2 TB, 1.8 TB and 2.4 TB 10K SAS Small Form Factor (SFF) Mission Critical Hard Drives with Basic Carrier (BC).Offering 1.2 TB and 2.4 TB 10K SAS Small Form Factor (SFF) Mission Critical TAA Hard Drives with Basic Carrier (BC).Specifications Hard drive Component for Server/workstation Bytes per sector 512e HDD speed 10000 RPM HDD size 2.5" HDD capacity 2.4 TB Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Features Component for Server/workstation Interface SAS Bytes per sector 512e HDD speed 10000 RPM HDD size 2.5" HDD capacity 2.4 TB Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Form factor SFF Technical details Harmonized System (HS) code 84717050 Interface SAS Height (imperial) 1.57 cm (0.62") Packaging content Storage drive adapter included No Weight & dimensions Width 75.7 mm Height 15.6 mm Depth 118.7 mm Packaging data Storage drive adapter included No Logistics data Harmonized System (HS) code 84717050 Other features Interface SAS Height (imperial) 1.57 cm (0.62") Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information
£933.40
HPE HPE 2.4TB SAS 12G Mission Critical 10K SFF SC 3-yea...
2.4TB SAS 12G Mission Critical 10K SFF SC 3-year Warranty 512e Multi Vendor HDDReasons To BuyHigh Performance Enterprise-Class Drives for High I/O WorkloadsHPE Mission Critical Hard Drives are ideal for demanding environments including transaction processing, database applications and high-performance computing (HPC).Deliever higher performance for enterprise data canter environments.12G SAS interface for increased performance.Efficient drives provide power for space-constrained data centers.Reliable Enterprise-Class Drives for Enterprise and Data Center WorkloadsHPE Mission Critical Hard Drives are designed for demanding 24/7 data center environments.Stable and consistent portfolio of drives offer long life cycles and steady supply.DescriptionDo your servers need high-performance enterprise hard drives for both your mission-critical and I/O-intensive applications? HPE Mission Critical Hard Drives offer a high level of performance and reliability for your most demanding application workloads. They help you improve server response times, power more transactions per second, and accelerate data transfer (I/O) speeds. HPE Mission Critical Hard Drives are available in 2.5-inch Small Form Factor (SFF). All HPE hard drives pass a rigorous qualification process, which certify that every drive is proven to perform in your HPE server and storage environments. All HPE hard drives also include digitally signed firmware which helps prevent unauthorized access to your data.What is new supporting point:Offering 300 GB, 600 GB, 1.2 TB, 1.8 TB and 2.4 TB 10K SAS Small Form Factor (SFF) Mission Critical Hard Drives with Basic Carrier (BC).Offering 1.2 TB and 2.4 TB 10K SAS Small Form Factor (SFF) Mission Critical TAA Hard Drives with Basic Carrier (BC).Specifications Hard drive Component for Server/workstation HDD interface transfer rate 12 Gbit/s Bytes per sector 512e Hot-swap Yes HDD speed 10000 RPM HDD size 2.5" HDD capacity 2.4 TB Compatible products HPE Storage Platforms, see QuickSpecs for more information Features Type HDD Component for Server/workstation HDD interface transfer rate 12 Gbit/s Interface SAS Bytes per sector 512e Hot-swap Yes HDD speed 10000 RPM HDD size 2.5" HDD capacity 2.4 TB Compatible products HPE Storage Platforms, see QuickSpecs for more information Form factor SFF Technical details Harmonized System (HS) code 84717050 Interface SAS Width (imperial) 12.7 cm (5") Hot-swap Yes Height (imperial) 21.9 cm (8.63") Depth (imperial) 25.4 cm (10") Weight & dimensions Width 127 mm Weight 1.36 kg Height 219.2 mm Depth 254 mm Weight (imperial) 1.36 kg (3 lbs) Dimensions (W x D x H) (imperial) 127 x 254 x 219.2 mm (5 x 10 x 8.63") Logistics data Harmonized System (HS) code 84717050 Other features Interface SAS Width (imperial) 12.7 cm (5") Height (imperial) 21.9 cm (8.63") Depth (imperial) 25.4 cm (10") Weight (imperial) 1.36 kg (3 lbs) Dimensions (W x D x H) (imperial) 127 x 254 x 219.2 mm (5 x 10 x 8.63") Compatible products HPE Storage Platforms, see QuickSpecs for more information
£949.00
HPE HPE 20TB SATA 6G Business Critical 7.2K LFF LP 1-ye...
20TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e ISE Multi Vendor HDDReasons To BuyHPE Hard Drives Deliver High Performance and Reliability Across HPE Server and Storage PlatformsHPE Hard Disk Drives (HDDs) are enterprise-class drives for demanding 24x7 data center environments.HPE HDDs are validated and tested with on-going quality monitoring throughout their lifecycle.Enhance Total Server Storage Capacity for Business Critical Workloads with HPE HDDsHPE offers the highest-capacity 26 TB hard drives that are ideal for digital content, bulk storage, cloud, and web environments.HPE Business Critical Hard Drives offer high capacity for economic bulk storage.HPE HDDs are Engineered to Deliver High Capacity, Performance, Reliability, and Data SecurityHPE HDDs are engineered to maximize total server storage capacity within data center environments.HPE HDDs help prevent unauthorized access to your data with Digitally Signed Firmware.HPE HDDs help simplify the cost and complexity of re-purposing or disposing of drives while protecting data with Instant Secure Erase (ISE) technology.Simplify HDD planning and standardize HDDs across HPE server and storage solutions.Common HPE HDD carriers offer consistency and compatibility across HPE server and storage platforms.DescriptionDo your HPE servers and storage platforms need high capacity and proven performance hard drives to optimize your business critical data storage workloads? HPE Business Critical Hard Drives are engineered to deliver the highest capacity, performance, reliability, and data security across your data center applications. HPE Business Critical Hard Drives allow you to store more data without sacrificing performance or reliability. HPE Business Critical Hard Drives are available in both 3.5-inch Large Form Factor (LFF) and 2.5-inch Small Form Factor (SFF) and ship with a standard one-year warranty. All HPE hard drives pass a rigorous qualification process, which certify that every drive is proven to perform in your HPE server and storage environments. All HPE hard drives include digitally signed firmware which helps prevent unauthorized access to your data.What is new supporting point:Introducing the market-leading 26 TB SAS/SATA HDD, offering the highest capacity for more petabytes per rack.Offering more capacities in Basic Carrier (BC) to support the latest platforms.Introducing 10 TB air-filled SAS/SATA HDD which provides lower price per GB in the same capacity, replacing the old Helium-filled 10 TB.Specifications Hard drive Bytes per sector 512e HDD speed 7200 RPM HDD capacity 20 TB Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Features Interface Serial ATA Bytes per sector 512e HDD speed 7200 RPM HDD capacity 20 TB Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Form factor LFF Technical details Interface Serial ATA Other features Interface Serial ATA Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information
£1,105.00
HPE HPE 240GB SATA 6G Read Intensive SFF BC Multi Vendo...
240GB SATA 6G Read Intensive SFF BC Multi Vendor SSDReasons To BuyHigh Performance, Exceptional Reliability, and Efficiency for Faster Business ResultsHPE SATA Read Intensive Solid State Drives are ideal for big data analytics, cloud computing, active archiving, database applications, and data warehousing.HPE SSDs achieve higher IOPs to enhance the performance of your data center.HPE SSDs maintain data accuracy with full data-path error detection.Choose from a broad portfolio of enhanced solutions in a wide variety of capacities.Support 6 Gb/s SATAHPE Multi Vendor SSDs Offer Longer SKU Lifecycles and Immediate Availability on SATA SSDsHPE enhanced its extensive SSD portfolio with a Multi Vendor SSD SKU offering that allows for extended SKU lifecycles, immediately available supply and preferably priced SATA SSDs.HPE Multi Vendor SSD SKU offering ensures the SATA SSD selected, delivers the minimum level of performance published, or better.Hewlett Packard Enterprise Solid State Drives are rigorously tested 3.35 million hours in various environments to achieve the quality standards you need.DescriptionDo you need to accelerate the performance and deliver enterprise features at an affordable price? HPE SATA Read Intensive (RI) Solid State Drives (SSDs) deliver enterprise features at an affordable price. HPE SATA RI SSDs deliver great performance for workloads high in reads such as boot/swap, web servers, and read caching. HPE SSDs are backed by over 3.35 million hours of testing and qualification [1] ensuring reliable, high performing drives. HPE Digitally Signed Firmware prevents unauthorized access to your data by providing the assurance that drive firmware comes from a trusted source. You can also monitor the lifespan of your SSD with HPE SmartSSD Wear Gauge to determine if any drives are at risk of failure.What is new supporting point:Offering 480 GB, 960 GB, 1.92 TB, 3.84 TB, and 7.68 TB storage capacities on selected models of SATA SSDs.Specifications Hard drive SSD capacity 240 GB Memory type TLC Data transmission Random write (4KB) 14000 IOPS Random read (4KB) 44000 IOPS Data transfer rate 6 Gbit/s Features Interface Serial ATA Component for Server/workstation NVMe No TBW rating 250 Hot-swap Yes SSD capacity 240 GB Memory type TLC Random write (4KB) 14000 IOPS Random read (4KB) 44000 IOPS Data transfer rate 6 Gbit/s SSD form factor 2.5" Target workload Read Intensive (RI) Hot-Plug support Yes Drive writes per day (DWPD) 0.8 Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Harmonized System (HS) code 84717070 Power Power consumption (average) 2.48 W Power consumption (write) 2.48 W Power consumption (read) 2.48 W Power consumption (idle) 1.23 W Performance Interface Serial ATA Component for Server/workstation NVMe No TBW rating 250 Hot-swap Yes SSD capacity 240 GB Memory type TLC Random write (4KB) 14000 IOPS Random read (4KB) 44000 IOPS Data transfer rate 6 Gbit/s Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Design Component for Server/workstation SSD form factor 2.5" Weight & dimensions Width 219.2 mm Weight 500 g Height 146.1 mm Depth 228.6 mm Technical details Interface Serial ATA Hot-swap Yes Weight (imperial) 0.499 kg (1.1 lbs) SSD form factor 2.5" Warranty period 3 year(s) Other features Weight (imperial) 0.499 kg (1.1 lbs) Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Warranty period 3 year(s) Logistics data Harmonized System (HS) code 84717070
£442.17
HPE HPE 240GB SATA 6G Read Intensive SFF BC Multi Vendo...
240GB SATA 6G Read Intensive SFF BC Multi Vendor SSDReasons To BuyHigh Performance, Exceptional Reliability, and Efficiency for Faster Business ResultsHPE SATA Read Intensive Solid State Drives are ideal for big data analytics, cloud computing, active archiving, database applications, and data warehousing.HPE SSDs achieve higher IOPs to enhance the performance of your data center.HPE SSDs maintain data accuracy with full data-path error detection.Choose from a broad portfolio of enhanced solutions in a wide variety of capacities.Support 6 Gb/s SATAHPE Multi Vendor SSDs Offer Longer SKU Lifecycles and Immediate Availability on SATA SSDsHPE enhanced its extensive SSD portfolio with a Multi Vendor SSD SKU offering that allows for extended SKU lifecycles, immediately available supply and preferably priced SATA SSDs.HPE Multi Vendor SSD SKU offering ensures the SATA SSD selected, delivers the minimum level of performance published, or better.Hewlett Packard Enterprise Solid State Drives are rigorously tested 3.35 million hours in various environments to achieve the quality standards you need.DescriptionDo you need to accelerate the performance and deliver enterprise features at an affordable price? HPE SATA Read Intensive (RI) Solid State Drives (SSDs) deliver enterprise features at an affordable price. HPE SATA RI SSDs deliver great performance for workloads high in reads such as boot/swap, web servers, and read caching. HPE SSDs are backed by over 3.35 million hours of testing and qualification [1] ensuring reliable, high performing drives. HPE Digitally Signed Firmware prevents unauthorized access to your data by providing the assurance that drive firmware comes from a trusted source. You can also monitor the lifespan of your SSD with HPE SmartSSD Wear Gauge to determine if any drives are at risk of failure.What is new supporting point:Offering 480 GB, 960 GB, 1.92 TB, 3.84 TB, and 7.68 TB storage capacities on selected models of SATA SSDs.Specifications Hard drive SSD capacity 240 GB Data transmission Random write (4KB) 14000 IOPS Random read (4KB) 44000 IOPS Features Interface Serial ATA NVMe No SSD capacity 240 GB Random write (4KB) 14000 IOPS Random read (4KB) 44000 IOPS SSD form factor 2.5" Target workload Read Intensive (RI) Hot-Plug support Yes Drive writes per day (DWPD) 0.8 Compatible products HPE Storage Platforms, see QuickSpecs for more information Power Power consumption (average) 2.48 W Performance Interface Serial ATA NVMe No SSD capacity 240 GB Random write (4KB) 14000 IOPS Random read (4KB) 44000 IOPS Compatible products HPE Storage Platforms, see QuickSpecs for more information Design SSD form factor 2.5" Weight & dimensions Width 219.2 mm Weight 500 g Height 146.1 mm Depth 228.6 mm Technical details Interface Serial ATA Weight (imperial) 0.499 kg (1.1 lbs) SSD form factor 2.5" Other features Weight (imperial) 0.499 kg (1.1 lbs) Compatible products HPE Storage Platforms, see QuickSpecs for more information
£821.60
HPE HPE 250GB SATA II HDD internal hard drive 7200 RPM ...
250GB SATA II, 7200RPM, 3.5"DescriptionDo you need more performance from your HP?HP hard drive deliver exceptional performance and endurance.HP hard drives are designed for reliability and mass storage demanded by today's server and storage environments.Specifications Hard drive HDD speed 7200 RPM HDD size 3.5" HDD capacity 250 GB Features Type HDD Interface Serial ATA II HDD speed 7200 RPM HDD size 3.5" HDD capacity 250 GB Technical details Interface Serial ATA II Other features Interface Serial ATA II
£170.30
HPE HPE 250GB, 1.5G, SATA, Hot Plug, 7.2k internal hard...
250GB, 1.5G, SATA, Hot Plug, 7.2kDescriptionAll HP hard drives pass a rigorous qualification process, which ensures that every HP drive is proven to perform in your HP ProLiant server. Before final certification, all HP SATA hard drives are optimized for compatibility and functionality, including support of SMART and HP Systems Insight Manager.Specifications Hard drive Data transfer rate 1.5 Gbit/s Component for Server/workstation HDD interface transfer rate 1.5 Gbit/s Full stroke seek time 22 ms Bytes per sector 512 SMART technology Yes Hot-swap Yes HDD speed 7200 RPM HDD size 3.5" HDD capacity 250 GB Features Type HDD Component for Server/workstation HDD interface transfer rate 1.5 Gbit/s Interface Serial ATA Full stroke seek time 22 ms Bytes per sector 512 SMART technology Yes Hot-swap Yes HDD speed 7200 RPM HDD size 3.5" HDD capacity 250 GB Average seek time 11 ms Power Operating voltage 5 / 12 V Operational conditions Operating temperature (T-T) 10 - 35 °C Technical details Interface Serial ATA Seek time 2 ms Hot-swap Yes Weight & dimensions Width 110.7 mm Weight 500 g Height 26.4 mm Depth 188.7 mm Other features Interface Serial ATA Seek time 2 ms Data transfer rate 1.5 Gbit/s
£170.30
HPE HPE 250GB, 3G, SATA, 7.2K rpm, LFF (3.5-inch) inter...
250GB, 3G, SATA, 7.2K rpm, LFF (3.5-inch)DescriptionHP SATA drives are designed for the reliability and mass storage demanded by today's entry server and external storage environments. The SATA portfolio is categorized into two categories: Entry (ETY) and Midline (MDL) drives. HP SATA Entry drives are the lowest unit-cost solution for entry-level servers. HP SATA Midline drives are designed with economical reliability and performance for external storage, backups and archival applications. These high capacity drives provide the lowest $/GB to our customers. Both Entry and Midline SATA drives provide the best price advantage for non-mission critical applications with low workloads of 40% or less. HP SATA drives are available small form factor (3.5-inch) and large form factor (2.5-inch) and ship with a standard one year warranty.Specifications Hard drive Component for Server/workstation HDD interface transfer rate 3 Gbit/s Hot-swap Yes HDD speed 7200 RPM HDD size 3.5" HDD capacity 250 GB Features Type HDD Component for Server/workstation HDD interface transfer rate 3 Gbit/s Interface Serial ATA II Hot-swap Yes HDD speed 7200 RPM HDD size 3.5" HDD capacity 250 GB Power Operating voltage 5 / 12 V Technical details Quantity per pack 1 pc(s) Interface Serial ATA II Hot-swap Yes Weight & dimensions Width 111 mm Weight 1.36 kg Height 26 mm Depth 184 mm Packaging data Quantity per pack 1 pc(s) Other features Interface Serial ATA II
£169.00
HPE HPE 2TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1...
2TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard DriveDescriptionSpecifications Hard drive Data transfer rate 6 Gbit/s Component for Server/workstation Full stroke seek time 18.2 ms Track to track seek time 0.7 ms Bytes per sector 512 HDD speed 7200 RPM HDD size 3.5" HDD capacity 2 TB Features Type HDD Component for Server/workstation Interface SAS Full stroke seek time 18.2 ms Track to track seek time 0.7 ms Bytes per sector 512 HDD speed 7200 RPM HDD size 3.5" HDD capacity 2 TB Average seek time 8.5 ms Power Operating voltage 5 / 12 V Technical details Interface SAS Weight & dimensions Width 105.8 mm Weight 1.36 kg Height 26.8 mm Depth 170 mm Other features Interface SAS Data transfer rate 6 Gbit/s
£204.10
HPE HPE 2TB 6G SAS LFF internal hard drive 2.05 TB 7200...
2TB, 3.5", SAS, 6Gb/s, 7200 rpmDescriptionHP 6Gb/sec SAS Enterprise and Midline hard drives deliver high performance solutions for hosting high transaction based applications. Available in HP hot plug carriers or non-hot plug. The HP SAS Enterprise and Midline hard drives come in both 2.5in (SFF) and 3.5in (LFF) industry standard form factors and are available in a variety of capacity points to meet a wide range of requirements. The SAS interface was designed and engineered for high availability, enterprise-class data storage where performance, reliability and data integrity are crucial.Performance and Reliability for Multiple Application Environments.High reliability for Mission Critical applications. High availability for Business Critical applications. Robust SAS interface (dual port, full duplex). Ideal for transaction processing, database applications, analytics, high performance computing and business applications. New universal hot plug carriers exclusively for HP ProLiant Gen8 servers. Maintaining existing universal hot plug carriers to support HP ProLiant G7 and earlier servers and server storage.Specifications Hard drive Data transfer rate 6 Gbit/s Component for Server/workstation Full stroke seek time 18.2 ms Track to track seek time 0.7 ms Bytes per sector 512 SMART technology Yes HDD speed 7200 RPM HDD size 3.5" HDD capacity 2.05 TB Features Component for Server/workstation Interface SAS Full stroke seek time 18.2 ms Track to track seek time 0.7 ms Bytes per sector 512 SMART technology Yes HDD speed 7200 RPM HDD size 3.5" HDD capacity 2.05 TB Average seek time 8.5 ms Operational conditions Operating temperature (T-T) 10 - 35 °C Ports & interfaces USB 3.2 Gen 1 (3.1 Gen 1) ports quantity 0 USB 2.0 ports quantity 0 Hot-Plug support 0 FireWire 800 No FireWire 400 No Network Wi-Fi No Ethernet LAN No Technical details Interface SAS Product colour Black Number of products included 1 pc(s) Internal Yes Weight & dimensions Width 105.8 mm Weight 725 g Height 26.8 mm Depth 170 mm Storage Compatible memory cards Not supported Card reader integrated No Other features Interface SAS Wi-Fi No Ethernet LAN No Product colour Black USB 3.2 Gen 1 (3.1 Gen 1) ports quantity 0 USB 2.0 ports quantity 0 Number of products included 1 pc(s) Hot-Plug support 0 FireWire 800 No FireWire 400 No Data transfer rate 6 Gbit/s Compatible memory cards Not supported Card reader integrated No Internal Yes
£204.10
HPE HPE 2TB 6G SATA LFF internal hard drive 2.05 TB 720...
2TB, 3.5", SATA, 7200rpm, 6Gb/s, 1.36kgDescriptionHP SATA hard drives are designed for reliability and mass storage demanded by today's server and storage environments. The SATA hard drive portfolio is categorized into two categories: Entry (ETY) and Midline (MDL) hard drives. HP SATA Entry hard drives are the lowest unit-cost solution for entry level servers. Designed for economical reliability and performance for non-mission critical applications, Entry and Midline SATA hard drives provide the best price advantage for these lower workload environments. These hard drives are available in Small Form Factor (2.5in) and Large Form Factor (3.5in) for both hot plug and non-hot plug environments.Designed and Engineered to Provide Reliable and Cost Efficient Data Storage.Increased Midline drive reliability of approximately two times that of Entry drives based on a <40% workload. Lowers cost without sacrificing reliability with Enterprise class hard drives at the lowest $/GB. Cost optimized and capacity optimized solutions that provide up to 3TB storage in a single device. Available in 2.5in (SFF) and 3.5in (LFF) form factors in a wide variety of capacity points. Rotational Vibration Sensors: Enhanced rotational vibration tolerance provides Enterprise class reliability in a Midline drive. 3Gb/sec data transfer rate supporting existing servers. New 6Gb/sec data transfer rate exclusively for HP ProLiant Gen8 servers, with new hot plug carrier design.Midline SATA offers customers the lowest $/GB drives and increased features over Entry SATA.Increased reliability of approximately two times Entry drive reliability based on <40% workload. Detects a specific temperature threshold, drive throttles performance to protect itself. Improved rotational vibration robustness for immunity to environmental rotational affects. Native Command Queuing (NCQ), Buffer Error Detection, Time Limited Error Recovery (TLER), Microcode Download and 3Gb/s compatibilty. Ship with a standard one year warranty.SATA ApplicationsWith the attractive low acquisition cost and high capacity points of SATA drives it is important to understand the appropriate applications where SATA drives should be used. Proper usage (IE <40% workload) of these drives will lessen the probability of drive failure. For high IOP's performance intense applications, mission critical applications or extreme environments HP recommends Enterprise Serial Attached SCSI (SAS) hard drives.Specifications Hard drive Data transfer rate 6 Gbit/s Full stroke seek time 16 ms Track to track seek time 0.5 ms Bytes per sector 512 HDD speed 7200 RPM HDD size 3.5" HDD capacity 2.05 TB Features Interface Serial ATA Full stroke seek time 16 ms Track to track seek time 0.5 ms Bytes per sector 512 Native Command Queuing (NCQ) Yes HDD speed 7200 RPM HDD size 3.5" HDD capacity 2.05 TB Average seek time 8.5 ms Operational conditions Operating temperature (T-T) 10 - 35 °C Ports & interfaces USB 3.2 Gen 1 (3.1 Gen 1) ports quantity 0 USB 2.0 ports quantity 0 FireWire 800 No FireWire 400 No Network Wi-Fi No Ethernet LAN No Technical details Interface Serial ATA Product colour Black Number of products included 1 pc(s) Native Command Queuing (NCQ) Yes Internal Yes Weight & dimensions Width 26.4 mm Weight 1.36 kg Height 184.2 mm Depth 110.7 mm Storage Compatible memory cards Not supported Card reader integrated No Other features Interface Serial ATA Wi-Fi No Ethernet LAN No Product colour Black USB 3.2 Gen 1 (3.1 Gen 1) ports quantity 0 USB 2.0 ports quantity 0 Number of products included 1 pc(s) Native Command Queuing (NCQ) Yes FireWire 800 No FireWire 400 No Data transfer rate 6 Gbit/s Compatible memory cards Not supported Card reader integrated No Internal Yes
£149.50
HPE HPE 2TB hot-plug SAS internal hard drive 7200 RPM 2.5"
2TB hot-plug SAS hard disk driveDescription2TB hot-plug SAS hard disk drive - 12Gb/sec transfer rate, 7,200 RPM, 2.5-inch small form factor (SFF), Midline (MDL), 512e format, SmartDrive Carrier (SC) - For use with Gen8/Gen9 or newerSpecifications Hard drive Component for Server/workstation HDD interface transfer rate 12 Gbit/s Hot-swap Yes HDD speed 7200 RPM HDD size 2.5" HDD capacity 2 TB Features Type HDD Component for Server/workstation HDD interface transfer rate 12 Gbit/s Interface SAS Hot-swap Yes HDD speed 7200 RPM HDD size 2.5" HDD capacity 2 TB Packaging content Storage drive adapter included No Technical details Interface SAS Hot-swap Yes Packaging data Storage drive adapter included No Other features Interface SAS
£903.50
HPE HPE 2TB non-hot-plug SATA HDD internal hard drive 7...
2TB non-hot-plug SATA hard disk drive - 7,200 RPM, 6Gb/sec transfer rate, 3.5-inch large form factor (LFF), MidlineDescriptionSpecifications Hard drive Data transfer rate 6 Gbit/s HDD speed 7200 RPM HDD size 3.5" HDD capacity 2 TB Features Type HDD Interface Serial ATA HDD speed 7200 RPM HDD size 3.5" HDD capacity 2 TB Technical details Interface Serial ATA Other features Interface Serial ATA Data transfer rate 6 Gbit/s
£150.80
HPE HPE 2TB SAS 12G Business Critical 7.2K LFF SC 1-yea...
2TB SAS 12G Business Critical 7.2K LFF SC 1-year Warranty Multi Vendor HDDDescriptionSpecifications Hard drive Component for Server/workstation HDD interface transfer rate 12 Gbit/s Bytes per sector 512n HDD speed 7200 RPM HDD size 3.5" HDD capacity 2 TB Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Features Type HDD Component for Server/workstation HDD interface transfer rate 12 Gbit/s Interface SAS Bytes per sector 512n HDD speed 7200 RPM HDD size 3.5" HDD capacity 2 TB Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Form factor LFF Power Operating voltage 5 / 12 V Technical details Quantity per pack 1 pc(s) Harmonized System (HS) code 84717050 Interface SAS Height (imperial) 2.69 cm (1.06") Packaging content Storage drive adapter included No Weight & dimensions Width 26.8 mm Height 170 mm Depth 105.8 mm Packaging data Storage drive adapter included No Quantity per pack 1 pc(s) Logistics data Harmonized System (HS) code 84717050 Other features Interface SAS Height (imperial) 2.69 cm (1.06") Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information
£344.50
HPE HPE 2TB SATA 3.5" 7200rpm internal hard drive 3.5" ...
2TB SATA hard drive - 7200 RPM, 3GB/s transfer rate, 3.5-inch large form factorDescriptionInformation technology professionals rely on HP quality to ensure maximum productivity. As the power of applications, processors, memory adapters and storage devices increases, high-end computer users are seeking ways to optimize their system performance. HP provides leading solutions, adding new levels of performance, availability, flexibility, and management.Specifications Hard drive Data transfer rate 3 Gbit/s Component for Server/workstation HDD speed 7200 RPM HDD size 3.5" HDD capacity 2 TB Compatible products HP ProLiant DL120 G6 Software Windows operating systems supported Yes Linux operating systems supported Yes Features Component for Server/workstation Interface Serial ATA II Windows operating systems supported Yes Linux operating systems supported Yes HDD speed 7200 RPM HDD size 3.5" HDD capacity 2 TB Compatible products HP ProLiant DL120 G6 System requirements Windows operating systems supported Yes Linux operating systems supported Yes Technical details Interface Serial ATA II Internal Yes Other features Interface Serial ATA II Windows operating systems supported Yes Linux operating systems supported Yes Data transfer rate 3 Gbit/s Internal Yes Compatible products HP ProLiant DL120 G6
£169.00
HPE HPE 3.84TB SAS 12G Read Intensive SFF SC Multi Vend...
3.84TB SAS 12G Read Intensive SFF SC Multi Vendor SSDReasons To BuyEnable up to 24Gb Max performance when combined with appropriate backplanes.High Performance, Exceptional Reliability, and Efficiency for Faster Business ResultsAchieve high IOPS and lower latency to enhance the performance of your data center.Maintain data accuracy with full data-path error detection and surprise power loss protection.Choose from a broad portfolio of enhanced solutions in a wide variety of capacities.DescriptionDo you need to accelerate the performance of your read intensive applications? HPE SAS Read Intensive (RI) Solid State Drives (SSDs) deliver enterprise features at an affordable price for applications requiring high read IOPS performance. HPE Enterprise SAS RI SSDs transfer data at full duplex (bidirectional) allowing greater I/O bandwidth to alleviate bottlenecks at twice the 6Gb interface of SATA drives. HPE SAS RI SSDs are best suited for mission-critical enterprise applications requiring a strong blend of high read IOPS and low latency. HPE Enterprise SAS RI SSDs are ideal for read caching, social media, web servers and boot/swap workloads. SAS technology continues to be the interface of choice for many workloads for its reliability and 24x7 operation in the enterprise data center.What is new supporting point:Offer 960 GB, 1.92 TB, 3.84 TB, 7.68 TB, and 15.36 TB storage capacities on selected models of SAS SSDs.Specifications Hard drive SSD capacity 3.84 TB Memory type TLC Data transmission Read speed 1080 MB/s Write speed 1030 MB/s Random write (4KB) 78000 IOPS Random read (4KB) 110000 IOPS Write latency 95 µs Read latency 175 µs Data transfer rate 12 Gbit/s Features Interface SAS Component for Server/workstation NVMe No SSD capacity 3.84 TB Read speed 1080 MB/s Write speed 1030 MB/s Memory type TLC Random write (4KB) 78000 IOPS Random read (4KB) 110000 IOPS Write latency 95 µs Read latency 175 µs Hardware encryption No Data transfer rate 12 Gbit/s SSD form factor 2.5" Target workload Read Intensive (RI) Hot-Plug support Yes Drive writes per day (DWPD) 1 Compatible products HPE Specialized Compute Platforms, see QuickSpecs for more information Power Power consumption (average) 9.19 W Performance Interface SAS Component for Server/workstation NVMe No SSD capacity 3.84 TB Read speed 1080 MB/s Write speed 1030 MB/s Memory type TLC Random write (4KB) 78000 IOPS Random read (4KB) 110000 IOPS Write latency 95 µs Read latency 175 µs Hardware encryption No Data transfer rate 12 Gbit/s Compatible products HPE Specialized Compute Platforms, see QuickSpecs for more information Design Component for Server/workstation SSD form factor 2.5" Weight & dimensions Height 15 mm Technical details Interface SAS Hardware encryption No SSD form factor 2.5" Other features Compatible products HPE Specialized Compute Platforms, see QuickSpecs for more information
£3,175.90
HPE HPE 3.84TB SATA 6G Read Intensive SFF SC Multi Vend...
3.84TB SATA 6G Read Intensive SFF SC Multi Vendor SSDReasons To BuyHigh Performance, Exceptional Reliability, and Efficiency for Faster Business ResultsHPE SATA Read Intensive Solid State Drives are ideal for big data analytics, cloud computing, active archiving, database applications, and data warehousing.HPE SSDs achieve higher IOPs to enhance the performance of your data center.HPE SSDs maintain data accuracy with full data-path error detection.Choose from a broad portfolio of enhanced solutions in a wide variety of capacities.Support 6 Gb/s SATAHPE Multi Vendor SSDs Offer Longer SKU Lifecycles and Immediate Availability on SATA SSDsHPE enhanced its extensive SSD portfolio with a Multi Vendor SSD SKU offering that allows for extended SKU lifecycles, immediately available supply and preferably priced SATA SSDs.HPE Multi Vendor SSD SKU offering ensures the SATA SSD selected, delivers the minimum level of performance published, or better.Hewlett Packard Enterprise Solid State Drives are rigorously tested 3.35 million hours in various environments to achieve the quality standards you need.DescriptionDo you need to accelerate the performance and deliver enterprise features at an affordable price? HPE SATA Read Intensive (RI) Solid State Drives (SSDs) deliver enterprise features at an affordable price. HPE SATA RI SSDs deliver great performance for workloads high in reads such as boot/swap, web servers, and read caching. HPE SSDs are backed by over 3.35 million hours of testing and qualification [1] ensuring reliable, high performing drives. HPE Digitally Signed Firmware prevents unauthorized access to your data by providing the assurance that drive firmware comes from a trusted source. You can also monitor the lifespan of your SSD with HPE SmartSSD Wear Gauge to determine if any drives are at risk of failure.What is new supporting point:Offering 480 GB, 960 GB, 1.92 TB, 3.84 TB, and 7.68 TB storage capacities on selected models of SATA SSDs.Specifications Hard drive SSD capacity 3.84 TB Memory type TLC Data transmission Read speed 520 MB/s Write speed 480 MB/s Random write (4KB) 22500 IOPS Random read (4KB) 54000 IOPS Write latency 65 µs Read latency 125 µs Data transfer rate 6 Gbit/s Features Interface Serial ATA Component for Server/workstation NVMe No SSD capacity 3.84 TB Read speed 520 MB/s Write speed 480 MB/s Memory type TLC Random write (4KB) 22500 IOPS Random read (4KB) 54000 IOPS Write latency 65 µs Read latency 125 µs Data transfer rate 6 Gbit/s SSD form factor 2.5" Target workload Read Intensive (RI) Hot-Plug support Yes Drive writes per day (DWPD) 0.5 Compatible products HPE Specialized Compute Platforms, see QuickSpecs for more information Harmonized System (HS) code 84717070 Power Power consumption (average) 3.88 W Power consumption (max) 6.3 W Power consumption (write) 3.46 W Power consumption (read) 3.46 W Power consumption (idle) 1.5 W Performance Interface Serial ATA Component for Server/workstation NVMe No SSD capacity 3.84 TB Read speed 520 MB/s Write speed 480 MB/s Memory type TLC Random write (4KB) 22500 IOPS Random read (4KB) 54000 IOPS Write latency 65 µs Read latency 125 µs Data transfer rate 6 Gbit/s Compatible products HPE Specialized Compute Platforms, see QuickSpecs for more information Design Component for Server/workstation SSD form factor 2.5" Weight & dimensions Width 219.2 mm Weight 680 g Height 146.1 mm Depth 228.6 mm Technical details Interface Serial ATA Weight (imperial) 0.684 kg (1.51 lbs) SSD form factor 2.5" Other features Weight (imperial) 0.684 kg (1.51 lbs) Compatible products HPE Specialized Compute Platforms, see QuickSpecs for more information Logistics data Harmonized System (HS) code 84717070
£3,148.60
HPE HPE 3.84TB SATA 6G Read Intensive SFF SC Multi Vend...
3.84TB SATA 6G Read Intensive SFF SC Multi Vendor SSDReasons To BuyHigh Performance, Exceptional Reliability, and Efficiency for Faster Business ResultsHPE SATA Read Intensive Solid State Drives are ideal for big data analytics, cloud computing, active archiving, database applications, and data warehousing.HPE SSDs achieve higher IOPs to enhance the performance of your data center.HPE SSDs maintain data accuracy with full data-path error detection.Choose from a broad portfolio of enhanced solutions in a wide variety of capacities.Support 6 Gb/s SATAHPE Multi Vendor SSDs Offer Longer SKU Lifecycles and Immediate Availability on SATA SSDsHPE enhanced its extensive SSD portfolio with a Multi Vendor SSD SKU offering that allows for extended SKU lifecycles, immediately available supply and preferably priced SATA SSDs.HPE Multi Vendor SSD SKU offering ensures the SATA SSD selected, delivers the minimum level of performance published, or better.Hewlett Packard Enterprise Solid State Drives are rigorously tested 3.35 million hours in various environments to achieve the quality standards you need.DescriptionDo you need to accelerate the performance and deliver enterprise features at an affordable price? HPE SATA Read Intensive (RI) Solid State Drives (SSDs) deliver enterprise features at an affordable price. HPE SATA RI SSDs deliver great performance for workloads high in reads such as boot/swap, web servers, and read caching. HPE SSDs are backed by over 3.35 million hours of testing and qualification [1] ensuring reliable, high performing drives. HPE Digitally Signed Firmware prevents unauthorized access to your data by providing the assurance that drive firmware comes from a trusted source. You can also monitor the lifespan of your SSD with HPE SmartSSD Wear Gauge to determine if any drives are at risk of failure.What is new supporting point:Offering 480 GB, 960 GB, 1.92 TB, 3.84 TB, and 7.68 TB storage capacities on selected models of SATA SSDs.Specifications Hard drive SSD capacity 3.84 TB Memory type TLC Data transmission Read speed 520 MB/s Write speed 480 MB/s Random write (4KB) 22500 IOPS Random read (4KB) 54000 IOPS Data transfer rate 6 Gbit/s Features Interface Serial ATA Component for Server/workstation NVMe No SSD capacity 3.84 TB Read speed 520 MB/s Write speed 480 MB/s Memory type TLC Random write (4KB) 22500 IOPS Random read (4KB) 54000 IOPS Hardware encryption No Data transfer rate 6 Gbit/s SSD form factor 2.5" Target workload Read Intensive (RI) Hot-Plug support Yes Drive writes per day (DWPD) 0.5 Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Harmonized System (HS) code 84717070 Power Power consumption (average) 3.88 W Power consumption (max) 6.3 W Power consumption (write) 3.46 W Power consumption (read) 3.46 W Power consumption (idle) 1.5 W Performance Interface Serial ATA Component for Server/workstation NVMe No SSD capacity 3.84 TB Read speed 520 MB/s Write speed 480 MB/s Memory type TLC Random write (4KB) 22500 IOPS Random read (4KB) 54000 IOPS Hardware encryption No Data transfer rate 6 Gbit/s Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Design Component for Server/workstation SSD form factor 2.5" Weight & dimensions Width 127 mm Weight 500 g Height 177.8 mm Depth 228.6 mm Technical details Interface Serial ATA Hardware encryption No Weight (imperial) 0.499 kg (1.1 lbs) SSD form factor 2.5" Other features Weight (imperial) 0.499 kg (1.1 lbs) Compatible products HPE Compute Mainstream Platforms, see QuickSpecs for more information Logistics data Harmonized System (HS) code 84717070
£3,120.00
HPE HPE 300GB 12G SAS 15K rpm SFF (2.5-inch) Enterprise...
HP 300GB 12G SAS 15K rpm SFF (2.5-inch) Enterprise 3yr Warranty Hard DriveDescriptionHP SAS Enterprise and Midline hard drives deliver high performance solutions for hosting high transaction based applications. Available in HP hot plug carriers or non-hot plug. HP SAS Enterprise and Midline hard drives come in both 2.5-inch (SFF) and 3.5-inch (LFF) industry standard form factors and are available in a variety of capacity points to meet a wide range of requirements. The SAS interface was designed and engineered for high availability, enterprise-class data storage where performance, reliability and data integrity are crucial.Performance and Reliability for Multiple Application Environments• High reliability for Mission Critical applications.Specifications Hard drive HDD interface transfer rate 12 Gbit/s Full stroke seek time 5.9 ms Track to track seek time 0.15 ms Bytes per sector 512 HDD speed 15000 RPM HDD size 2.5" HDD capacity 300 GB Features Type HDD HDD interface transfer rate 12 Gbit/s Interface SAS Full stroke seek time 5.9 ms Track to track seek time 0.15 ms Bytes per sector 512 HDD speed 15000 RPM HDD size 2.5" HDD capacity 300 GB Average seek time 2.9 ms Power Operating voltage 5 V Technical details Interface SAS Weight & dimensions Width 78.7 mm Weight 450 g Height 16 mm Depth 138.4 mm Other features Interface SAS
£179.40
HPE HPE 300GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterpr...
HP 300GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard DriveDescriptionHP SAS Enterprise and Midline hard drives deliver high performance solutions for hosting high transaction based applications. Available in HP hot plug carriers or non-hot plug. HP SAS Enterprise and Midline hard drives come in both 2.5-inch (SFF) and 3.5-inch (LFF) industry standard form factors and are available in a variety of capacity points to meet a wide range of requirements. The SAS interface was designed and engineered for high availability, enterprise-class data storage where performance, reliability and data integrity are crucial.Specifications Hard drive Component for Server/workstation Full stroke seek time 5.9 ms Average latency 118.7 ms Bytes per sector 512 HDD speed 15000 RPM HDD size 2.5" HDD capacity 300 GB Features Type HDD Component for Server/workstation Interface SAS Full stroke seek time 5.9 ms Average latency 118.7 ms Bytes per sector 512 HDD speed 15000 RPM HDD size 2.5" HDD capacity 300 GB Operational conditions Operating temperature (T-T) 10 - 35 °C Technical details Interface SAS Weight & dimensions Width 75.7 mm Height 15.6 mm Depth 118.7 mm Other features Interface SAS
£250.90
HPE HPE 300GB 2.5" 10k SAS 6G internal hard drive 10000...
Top Value 300GB 2.5" 10k SAS 6Gb/s HDDDescriptionHP SAS 10K rpm and 15K rpm hard drives deliver high performance solutions for hosting high transaction based applications. Available in HP hot plug carriers or non-hot plug. The HP SAS hard drives come in both 2.5in (SFF) and 3.5in (LFF) industry standard form factors and are available in a variety of capacity points to meet a wide range of requirements. The SAS interface was designed and engineered for high availability, enterprise-class data storage where performance, reliability and data integrity are crucial.Specifications Hard drive Data transfer rate 6 Gbit/s Component for Server/workstation HDD speed 10000 RPM HDD size 2.5" HDD capacity 300 GB Software Windows operating systems supported Yes Linux operating systems supported Yes Features Component for Server/workstation Interface SAS Windows operating systems supported Yes Linux operating systems supported Yes HDD speed 10000 RPM HDD size 2.5" HDD capacity 300 GB System requirements Windows operating systems supported Yes Linux operating systems supported Yes Operational conditions Operating temperature (T-T) 0 - 60 °C Storage temperature (T-T) -40 - 65 °C Operating relative humidity (H-H) 5 - 90% Storage relative humidity (H-H) 5 - 90% Technical details Interface SAS Number of products included 1 pc(s) Internal Yes Other features Interface SAS Windows operating systems supported Yes Linux operating systems supported Yes Number of products included 1 pc(s) Data transfer rate 6 Gbit/s Internal Yes
£206.70
HPE HPE 300GB 2.5" 12G SAS internal hard drive 15000 RP...
300GB, 2.5", 12G SAS, 15K rpm, LFF, Ent, SCDescriptionDo your servers need high-performance Enterprise hard drives for both your mission-critical and I/O intensive applications? HPE Server Enterprise Hard Drives offer the highest level of performance and reliability for your most demanding application workloads. They deliver maximum performance without compromising reliability, specifically engineered to meet the needs of hot data. Enterprise drives help you improve server response times, power more transactions per second and accelerate data transfer (I/O) speeds. HPE Server Enterprise Hard Drives are backed by over 2.4 million hours of the industry’s most rigorous testing and qualification program ensuring customer’s reliable, rugged drives. HPE integrated firmware protects data from malicious attacks that could change or destroy it. The self-describing icons on the HPE SMART Carrier takes the guess work out of a drive’s status and a “do not remove” button prevents data loss from human error.Performance and Reliability for Multiple Application EnvironmentsHPE Server Enterprise Hard Drives are ideal for transaction processing, database applications, big data analytics and high-performance computing.Broad portfolio of optimized solutions provide up to 1.8 TB of storage in a smaller footprint.Efficient drives for power and space constrained datacenters.Latest 12G SAS interface for increased performance.Specifications Hard drive Component for Server/workstation HDD interface transfer rate 12 Gbit/s HDD speed 15000 RPM HDD size 2.5" HDD capacity 300 GB Features Component for Server/workstation HDD interface transfer rate 12 Gbit/s Interface SAS HDD speed 15000 RPM HDD size 2.5" HDD capacity 300 GB Technical details Quantity per pack 1 pc(s) Harmonized System (HS) code 84717050 Interface SAS Packaging content Storage drive adapter included No Weight & dimensions Width 75.7 mm Height 15.6 mm Depth 118.7 mm Packaging data Storage drive adapter included No Quantity per pack 1 pc(s) Logistics data Harmonized System (HS) code 84717050 Other features Interface SAS
£252.20
HPE HPE 300GB 2.5" 12G SAS internal hard drive 15000 RP...
300GB, 2.5", 12G SAS, 15K rpm, SFF, Ent, STDescriptionDo your servers need high-performance Enterprise hard drives for both your mission-critical and I/O intensive applications? HPE Server Enterprise Hard Drives offer the highest level of performance and reliability for your most demanding application workloads. They deliver maximum performance without compromising reliability, specifically engineered to meet the needs of hot data. Enterprise drives help you improve server response times, power more transactions per second and accelerate data transfer (I/O) speeds. HPE Server Enterprise Hard Drives are backed by over 2.4 million hours of the industry’s most rigorous testing and qualification program ensuring customer’s reliable, rugged drives. HPE integrated firmware protects data from malicious attacks that could change or destroy it. The self-describing icons on the HPE SMART Carrier takes the guess work out of a drive’s status and a “do not remove” button prevents data loss from human error.Performance and Reliability for Multiple Application EnvironmentsHPE Server Enterprise Hard Drives are ideal for transaction processing, database applications, big data analytics and high-performance computing.Broad portfolio of optimized solutions provide up to 1.8 TB of storage in a smaller footprint.Efficient drives for power and space constrained datacenters.Latest 12G SAS interface for increased performance.Specifications Hard drive Component for Server/workstation HDD interface transfer rate 12 Gbit/s HDD speed 15000 RPM HDD size 2.5" HDD capacity 300 GB Features Type HDD Component for Server/workstation HDD interface transfer rate 12 Gbit/s Interface SAS HDD speed 15000 RPM HDD size 2.5" HDD capacity 300 GB Power Operating voltage 5 V Technical details Quantity per pack 1 pc(s) Interface SAS Packaging content Storage drive adapter included No Packaging data Storage drive adapter included No Quantity per pack 1 pc(s) Other features Interface SAS
£179.40
HPE HPE 300GB 3G SAS 10K SFF (2.5-inch) Dual Port Enter...
300GB 3G SAS 10K SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard DriveDescriptionSerial Attached SCSI (SAS) provides a superior storage solution. With some storage requirements escalating and others becoming more complex, factors such as flexibility, performance, increased reliability, greater density, security, scalability and accessibility are more critical than ever. Today's organizations consist of different kinds of environments. Enterprise data centers must be online almost 24X7, fulfill requests from numerous users simultaneously, and allow for constant growth and expansion while in operation. Other customer environments require high capacity storage and high data availability for low I/O environments. HP's portfolio of SAS drives meets all these demands.Specifications Hard drive Component for Server/workstation HDD interface transfer rate 3 Gbit/s HDD speed 10000 RPM HDD size 2.5" HDD capacity 300 GB Features Type HDD Component for Server/workstation HDD interface transfer rate 3 Gbit/s Interface SAS HDD speed 10000 RPM HDD size 2.5" HDD capacity 300 GB Power Operating voltage 5 V Packaging content Storage drive adapter included No Technical details Interface SAS Packaging data Storage drive adapter included No Other features Interface SAS
£172.90
HPE HPE 300GB 3G SAS 10K SFF (2.5-inch) Dual Port Enter...
300GB 3G SAS 10K SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard DriveDescriptionSerial Attached SCSI (SAS) provides a superior storage solution. With some storage requirements escalating and others becoming more complex, factors such as flexibility, performance, increased reliability, greater density, security, scalability and accessibility are more critical than ever. Today's organizations consist of different kinds of environments. Enterprise data centers must be online almost 24X7, fulfill requests from numerous users simultaneously, and allow for constant growth and expansion while in operation. Other customer environments require high capacity storage and high data availability for low I/O environments. HP's portfolio of SAS drives meets all these demands.Specifications Hard drive Component for Server/workstation HDD interface transfer rate 3 Gbit/s HDD speed 10000 RPM HDD size 2.5" HDD capacity 300 GB Features Type HDD Component for Server/workstation HDD interface transfer rate 3 Gbit/s Interface SAS HDD speed 10000 RPM HDD size 2.5" HDD capacity 300 GB Power Operating voltage 5 V Packaging content Storage drive adapter included No Technical details Interface SAS Packaging data Storage drive adapter included No Other features Interface SAS
£170.30
HPE HPE 300GB 6G SAS 15K rpm SFF internal hard drive 15...
300 GB 2.5" Internal Hard Drive - 6Gb/s SAS - 15000 rpm - Hot PluggableDescriptionHP 6Gb/sec SAS Enterprise and Midline hard drives deliver high performance solutions for hosting high transaction based applications. Available in HP hot plug carriers or non-hot plug. The HP SAS Enterprise and Midline hard drives come in both 2.5in (SFF) and 3.5in (LFF) industry standard form factors and are available in a variety of capacity points to meet a wide range of requirements. The SAS interface was designed and engineered for high availability, enterprise-class data storage where performance, reliability and data integrity are crucial.Performance and Reliability for Multiple Application Environments.High reliability for Mission Critical applications. High availability for Business Critical applications. Robust SAS interface (dual port, full duplex). Ideal for transaction processing, database applications, analytics, high performance computing and business applications. New universal hot plug carriers exclusively for HP ProLiant Gen8 servers. Maintaining existing universal hot plug carriers to support HP ProLiant G7 and earlier servers and server storage.Specifications Hard drive Data transfer rate 6 Gbit/s Component for Server/workstation Certification RoHS HDD speed 15000 RPM HDD size 2.5" HDD capacity 300 GB Software Windows operating systems supported Yes Linux operating systems supported Yes Certificates Certification RoHS Features Component for Server/workstation Interface SAS Windows operating systems supported Yes Linux operating systems supported Yes Certification RoHS HDD speed 15000 RPM HDD size 2.5" HDD capacity 300 GB Power Operating voltage 5 V System requirements Windows operating systems supported Yes Linux operating systems supported Yes Ports & interfaces Hot-Plug support Yes Technical details Interface SAS Internal Yes Weight & dimensions Weight 725 g Other features Interface SAS Windows operating systems supported Yes Linux operating systems supported Yes Hot-Plug support Yes Data transfer rate 6 Gbit/s Certification RoHS Internal Yes
£182.00
HPE HPE 300GB 6G SAS SFF internal hard drive 10000 RPM ...
300GB 10000 RPM 6Gb/sec Hot Swap HDDDescription300GB hot-swap dual-port Serial Attached SCSI (SAS) hard drive - 10,000 RPM, 6Gb/sec transfer rate, 2.5-inch Small Form Factor (SFF) - (Option 507127-B21, Model MB3000FBNWV)Specifications Hard drive Data transfer rate 6 Gbit/s Component for Server/workstation Hot-swap Yes HDD speed 10000 RPM HDD size 2.5" HDD capacity 300 GB Features Component for Server/workstation Interface SAS Hot-swap Yes HDD speed 10000 RPM HDD size 2.5" HDD capacity 300 GB Power Operating voltage 5 V Technical details Interface SAS Hot-swap Yes Internal Yes Other features Interface SAS Data transfer rate 6 Gbit/s Internal Yes
£171.60